horizontal sliding window vent
Download
- STEP, whole design 642 KB
- STEP, every part (zip) 113 KB
- 3MF, every part (zip) 169 KB
Sign in to download.

Günther designs for Extrastep.
Summary
This is a window exhaust vent for a 3D printer or laser engraver, made to stand in a horizontal sliding window.
Defaults
The panel is 39 mm thick to match the sash, so it sits in the frame's 40 mm channel. Two lips on its sash-side edge wrap around the closed sash. A flattened slot behind a rodent grill passes air through the panel. On the room side it flares into a round collar, about 101 mm (4in) across with a retaining bead, that takes flexible duct held by an optional hose clamp. The duct is kept 23 mm clear of the jamb-side edge, where the frame has a lip. Ask extrastep to adjust these to fit your window precisely.
Modules
The vent is split into sections so it fits smaller printers, and the sections join with sliding dovetails . Ask extrastep to modify the top, bottom and the optional middle piece lengths so it fits your window and you printer bed size.