magazine lift

Fork
Download
This is a slim lift tool for taking magazine issues out of acrylic displays.

This is a slim lift tool for taking magazine issues out of acrylic displays. It rests inside the display behind the magazine, and an L-shaped shelf at its bottom lifts the issue out. It is about 381 mm (15 in) long and only 12.5 mm deep, under the 12.7 mm limit, so it fits inside the display. It is built from three pieces joined end to end by slide-in dovetail joints with a slip-fit clearance for gluing: a bottom piece with a 100 mm wide shelf, a 30 mm upright and a 45 degree gusset; a middle shaft section 24 mm wide and 6 mm thick; and a top piece ending in a 50 mm square grip tab with rounded corners and a 25 mm finger hole.